With the team of SteamBot's created and ready to go, I was in a position to complete the final section of the animation. The Harwood twins had also completed their superb and highly detailed train model by this time, providing all the finished components required. Unfortunately, we hit severe delays with several technical faults during the exchange of models. Unfortunately, the high-quality train model proved too much for mine and Lee's machines! We had repeated attempts and re-hashes of the model, some of which refused to render, lost it textures or even just refused to open. After a few failed attempts, we managed to get a few working models going, albeit slowly. Luckily, my computer was built to take punishment, so I was able to make do with the larger model (Unusually, the smaller files actually created more crashes). It was a slower process and required me to use a single window to prevent my computer running out of memory... but we managed to get by. Additionally, I found that 3DS MAx would have a stronger chance of coping if the unused sections were hidden during construction. It was considerably slower and more fiddly than I would have liked, but we at least were able to make progress nonetheless. Fortunately, my interactions with the train and carriages were minimal, and did not require large amounts of work.
The first order of business was to update the undercarriage model. Since it's last implementation, it had seen several tweaks and adjustments. Fortunately, the undercarriage was moved as a whole, and had an exceptionally simple movement (3 Key frames)... thus, all I had to do was copy the movements of the older model, and then delete it. Within a few minutes, the improved undercarriage had slotted perfectly within the old animation. The only additional tweak required was that SteamBot had to be moved back a bit further so that it comfortably sat on the floor of the cabin. The camera was also nudged upwards slightly to compensate for this, and to place more of a focus on the top of the undercarriage, which would be seeing the imminent arrival of...
The Boiler and Engine Chassis! The screenshot here really doesn't do justice to the awesome finished model. Some screenshots are on the main blog. If you haven't seen it already, then I'd recommend you do so! Fortunately, the chassis was perfectly constructed so that it was able to fall as a single object onto the undercarriage. It could be grouped and moved as one. Because the chassis acts more as a 'frame' than an actual working component of the train, it seemed best not to focus too heavily on this and have effects like separate pieces flying in. That said, when sorting the camera work out, I was compelled to zoom into the little plaque on the side of the train before skipping to the next part of the animation. As I said before, the attention to detail was fantastic... they went so far that they included the exact plaque of the mode!
So the next phase was to bring in the carriage that would hold the passengers in the animation. With the front of the train complete, the first step was to 'hide' it so that it wouldn't pointlessly eat away at my processor (Aside from a few moments when I needed the model to align the carriage perfectly to it). The tracks were brought up behind the model, and the carriage wheels rolled in. Much like the chassis, the workings of the carriage were a lot less important, so there wasn't a great need for much attention to be brought to the intricacies of it.
The floor and undercarriage were then dropped in from above. Again, it was a simple and relatively straightforward motion.
The tricky bit then came from animating the 4 passengers. It was a fiddly process and wasn't entirely helped by the fact that I hadn't quite grouped and attached everything correctly, which threw up a few difficulties during animating. Sadly, I hadn't grouped all of the new additions to the models, which made them unresponsive to some animations and awkward in others. Nonetheless, I'd already created the falling animations by this time, so I decided to press on, rather than attempt to re-tweak everything.
Luckily, the fact that they weren't going to have a large amount of focus placed on them meant that I was able to skip some of the unnecessary details of their animations. All of the smaller additions required in the basic steamBot model (Moving dials/clock handles, spinning cogs etc) were left out, as their effects would be too minimal to justify the animation. We were working to a deadline and I needed to get a finished render ASAP. However, the reduced smaller details meant that they needed to be compensated by more 'eye-catching' motions elsewhere. The original SteamBot model needed the smaller details because it was so close to the screen and had moments with little action where the audience's attention might drift and notice their absence. However, as there were 4 models, each with their own unique features and details to distract the attention, I only needed a few eye-catchers to compensate for the lack of smaller movements.
The most obvious answer was to throw off one of the bot's hats as they landed. The ProfBot was chosen for this task. So as he landed, the hat was thrown off and spun in the air, only to be caught by the smaller kidBot, who would proceed to hand the hat back to ProfBot. Unfortunately, the positioning of the characters meant that I was unable to properly have the professor pick up the hat and place it back on his head. Luckily, I was able to arrange a quick compromise: The Professor would flip the hat instead. As the KidBot held out the mortarboard, the professor would proceed to flip the hat back on his head. The advantage here was that this motion had a lot more power to it, and would again help compensate for the lack of small details.
The animation between the Gent and Boiler Bots were pretty simple too. The BoilerBot tipped his hat to the Gent, and in return the Gent returned with a curt nod (Well... leaning forward, as the bots don't exactly have necks!). The graphics of these were interesting enough to not require a lot of motion. To be honest, these robots are more eye-candy for the viewers, so they didn't exactly need a lot of focus to be placed on them. They basically needed to appear for the narrator to comment on who they were and how the trains by this time were available to everyone.
The final step was to simply have the carriage chassis to fall down onto the undercarriage. The movement here was essentially the same as the engine chassis
I finished the animation by scrolling the camera down the train so that it pointed to the front. Personally, this seemed like a nice angle to prepare for the initiation of the movement. It would be from here, that the video will cut to Lee's animation of the train's movement, where the motion and specific movements of the train could be observed and demonstrated in detail.
No comments:
Post a Comment